Quality 1Y0-241 PDF Dumps - 1Y0-241 Exam Questions
Most UptoDate Citrix 1Y0-241 Exam Dumps PDF 2024
Citrix 1Y0-241 exam is designed to assess your skills and knowledge in deploying and managing Citrix ADC 13 with Traffic Management. 1Y0-241 exam is primarily intended for IT professionals who have experience in networking, virtualization, and cloud computing. By passing the exam, you will become a certified Citrix ADC expert and be able to demonstrate your ability to deploy and manage complex Citrix environments.
NEW QUESTION # 63
Scenario: A Citrix Administrator configured the rewrite policies below:
bind lb vServer VIP1_http -policyName POL_14 -priority 120 -gotoPriorityExpression END -type REQUEST bind lb vServer VIP1_http -policyName POL_12 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer VIP1_http -policyName POL_15 -priority 100 -gotoPriorityExpression END -type REQUEST bind lb vServer VIP1_http -policyName POL_13 -priority 101 -gotoPriorityExpression NEXT -type REQUEST Which policy will be evaluated last considering POL_12 is hit first?
- A. POL_15
- B. POL_14
- C. POL_12
- D. POL_13
Answer: A
NEW QUESTION # 64
In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the site persistence method.
What is used to source the traffic when the connection is proxied?
- A. Subnet IP (SNIP)
- B. LDNS IP Address
- C. Virtual IP (VIP)
- D. Client source IP
Answer: A
NEW QUESTION # 65
If VLAN 20 is bound to the interface as tagged in an environment where Citrix ADC is configured with the default settings, which VLANs will be bound to an interface?
- A. VLAN 20 tagged only
- B. VLAN 20 untagged only
- C. VLAN 1 untagged and VLAN 20 tagged
- D. VLAN 1 tagged and VLAN 20 tagged
Answer: C
NEW QUESTION # 66
What is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
- B. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- C. If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http:// www.newdomain.com/mysite/.
- D. If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain .com/mysite/
.
Answer: D
NEW QUESTION # 67
Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing, attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?
- A. Enable the content switching feature
- B. Bind a certificate
- C. Disable the spillover redirect URL.
- D. Check the priorities of the existing policies
Answer: D
NEW QUESTION # 68
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. 10.1.100.100:443
- B. Backup content switching vServer
- C. http://www.site1.com/mysite1/maintenance
- D. vServer-LB-2
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/content-switching/protecting-against-failure.html#configuring-a-redirection-url
"If a content switching virtual server is configured with both a backup virtual server and a redirect URL, the backup virtual server takes precedence over the redirect URL. A redirect URL is used when the primary and backup virtual servers are down."
NEW QUESTION # 69
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Persistence time-Out
- B. Persistence threshold
- C. Wait time
- D. Request threshold
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/graceful-shutdown.html
NEW QUESTION # 70
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?
- A. The Citrix ADC appliances have different firmware versions.
- B. The junior administrator made the changes and did NOT force a failover to save the configuration.
- C. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
- D. Both Citrix ADCs in the HA pair restarted overnight.
Answer: C
Explanation:
"You are connected to the secondary node..." when first login to the NSIP and after saving the configuration
NEW QUESTION # 71
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE_HTTP_REQ
- B. REPLACE
- C. REPLACE_ALL
- D. CORRUPT_HTTP_HEADER
Answer: B
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/rewrite/rewrite-action-policy-examples/exampl
NEW QUESTION # 72
How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0 in every request?
- A. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - B. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - C. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT - D. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT
Answer: B
NEW QUESTION # 73
Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?
- A. SDX
- B. VPX
- C. CPX
- D. MPX
Answer: A
Explanation:
Explanation
answer: B. SDX
Short Explanation with reference: Citrix ADC SDX is a multi-tenant platform that allows multiple instances of Citrix ADC to run on a single physical appliance. Each instance is isolated from the others and has its own dedicated resources, configuration, and management. This enables service providers and enterprises to offer Citrix ADC as a service to their customers or internal departments, while maintaining security and operational consistency across any deployment12. Citrix ADC VPX, MPX, and CPX are single-tenant platforms that do not support multi-tenancy out of the box3.
NEW QUESTION # 74
Scenario: A Citrix Administrator entered the configuration below:
> add rewrite policy pol_external_to_internal 'http.req.hostname.server.eq("host_name_of_external_Web_server")' act_external_to_internal Which two possible rewrite actions can the administrator choose when a rewrite policy evaluates to TRUE? (Choose two.)
- A. Reset
- B. Deny
- C. Bypass
- D. Drop
Answer: A,B
NEW QUESTION # 75
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Persistence threshold
- B. Persistence time-Out
- C. Request threshold
- D. Wait time
Answer: B
NEW QUESTION # 76
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A nested group to the new group
- C. A command policy to the group
- D. Users to the group on the Citrix ADC
Answer: C
NEW QUESTION # 77
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. If
the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
.com/mysite/. - B. If
the vServer-CS-1 encounters a high connection rate, then users will be redirected to
http://www.newdomain.com/mysite/. - C. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- D. All
the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answer: A
NEW QUESTION # 78
Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?
- A. VIP
- B. MIP
- C. SNIP
- D. NSIP
Answer: D
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-custom-monitors/configure Explanation with reference:
According to the Citrix documentation1, monitor probes originate from the NSIP address by default. However, if the subnet of a StoreFront server is different from that of the appliance, then the subnet IP (SNIP) address is used. Therefore, the correct answer is D. NSIP.
1: Citrix StoreFront stores monitoring | NetScaler 14.1
NEW QUESTION # 79
A Citrix Administrator needs to bind a URL transformation policy.
Which three bind points could the administrator use? (Choose three.)
- A. AAA user
- B. Authentication, authorization, and auditing (AAA) group
- C. Policy label
- D. Default global
- E. Content switching vServer
Answer: A,C,D
NEW QUESTION # 80
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.
set gslb parameter -ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
- A. Empty Domain Service (EDS)
- B. Time to live (TTL)
- C. Multiple IP responses (MIR)
- D. Round-trip time (RTT)
Answer: D
NEW QUESTION # 81
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
- A. Configure specific alerts for vServers using Citrix ADM.
- B. Configure TCP Insight on the Citrix ADM.
- C. Configure network reporting on the Citrix ADM by setting the threshold and email address.
- D. Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.
Answer: A
Explanation:
Explanation
The correct answer is D. Configure specific alerts for vServers using Citrix ADM.
Short Explanation with reference: Citrix Application Delivery Management (ADM) is a web-based tool that provides end-to-end visibility and management for Citrix ADC deployments. It also enables administrators to view real-time and historical data on response time, client network latency, and server-side processing time for applications that are load balanced on the Citrix ADC1. Citrix ADM allows administrators to create thresholds and alerts to monitor the state of a Citrix ADC instance, entity, or counter. When the value of a counter exceeds the threshold, Citrix ADM generates an event to signify a performance-related issue, and performs an action such as sending an alert, email, or SMS notification1.
To configure specific alerts for vServers using Citrix ADM, administrators need to follow these steps1:
In Citrix ADM, navigate to Settings > Analytics Settings > Thresholds.
Under Thresholds, click Add.
On the Create Thresholds page, specify the following details:
Name - Name for configuring the threshold.
Traffic Type - Type of traffic for which you want to configure the threshold. For example, HTTP.
Entity - Category or resource type for which you want to configure the threshold. For example, vServer.
Reference Key - Automatically generated value based on the selected traffic type and entity.
Duration - Interval for which you want to configure the threshold.
Configure Rule - Rule for the metric for which you want to configure the threshold. For example, Client Connections > 1000.
Notification Settings - Enable threshold and receive notifications through various channels like email, slack, or SMS when threshold exceeds.
Click Create.
The other options are incorrect because they either do not allow setting specific thresholds and alerts for vServers, or they are used for different purposes. Network reporting (option A) and SMTP reporting (option B) are features of Citrix ADM that enable administrators to generate and send reports on network performance and statistics2. They do not allow setting thresholds and alerts for vServers. TCP Insight (option C) is a feature of Citrix ADM that provides detailed analytics of TCP traffic passing through the Citrix ADC instances3. It does not allow setting thresholds and alerts for vServers. Therefore, the correct answer is D. Configure specific alerts for vServers using Citrix ADM.
NEW QUESTION # 82
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?
- A. High availability nodes
- B. SSL profile
- C. Load-balancing vServers
- D. Network interface
Answer: C
NEW QUESTION # 83
......
100% Free CCA-AppDS 1Y0-241 Dumps PDF Demo Cert Guide Cover: https://guidetorrent.dumpstorrent.com/1Y0-241-exam-prep.html