Exam Passing Guarantee Feb 17, 2024 350-701 Exam with Accurate Quastions!
Test Engine to Practice Test for 350-701 Valid and Updated Dumps
Cisco 350-701 exam covers a wide range of security technologies, including network security, cloud security, endpoint protection, secure network access, visibility, and enforcement. Candidates are expected to have a strong understanding of these security technologies and their implementation in real-world scenarios. 350-701 exam also tests candidates' abilities to configure, manage, and troubleshoot these technologies, as well as their knowledge of security policies and best practices.
Cisco 350-701 certification exam is a vital step towards achieving the CCNP Security certification. It is an excellent way to validate your skills and knowledge in implementing and operating Cisco security core technologies. Passing 350-701 exam gives you the confidence to manage and secure enterprise networks, and it opens up new career opportunities in the field of cybersecurity.
The Implementing and Operating Cisco Security Core Technologies exam evaluates the candidate's understanding of various security concepts, including network security, cloud security, endpoint protection, secure network access, visibility, and enforcement. 350-701 exam also tests the candidate's ability to implement and operate Cisco's security solutions, including Next-Generation Firewall, Secure Access, VPN, Content Security, and Network Security Management. Implementing and Operating Cisco Security Core Technologies certification exam is intended for security professionals who want to enhance their knowledge and skills in implementing and operating Cisco's security solutions.
NEW QUESTION # 257
An engineer has been tasked with configuring a Cisco FTD to analyze protocol fields and detect anomalies in the traffic from industrial systems. What must be done to meet these requirements?
- A. Configure intrusion rules for the DNP3 preprocessor
- B. Implement pre-filter policies for the CIP preprocessor
- C. Modify the access control policy to trust the industrial traffic
- D. Enable traffic analysis in the Cisco FTD
Answer: B
Explanation:
The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct.
The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields.
The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine.
You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic.
The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct.
The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields.
The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine.
You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic.
Reference:
Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications.
Note:
+ An intrusion rule is a specified set of keywords and arguments that the system uses to detect attempts to exploit vulnerabilities in your network. As the system analyzes network traffic, it compares packets against the conditions specified in each rule, and triggers the rule if the data packet meets all the conditions specified in the rule. + Preprocessor rules, which are rules associated with preprocessors and packet decoder detection options in the network analysis policy. Most preprocessor rules are disabled by default.
The Modbus, DNP3, and CIP SCADA preprocessors detect traffic anomalies and provide data to intrusion rules. Therefore in this question only answer A or answer C is correct.
The DNP3 preprocessor detects anomalies in DNP3 traffic and decodes the DNP3 protocol for processing by the rules engine, which uses DNP3 keywords to access certain protocol fields.
The Common Industrial Protocol (CIP) is a widely used application protocol that supports industrial automation applications. EtherNet/IP is an implementation of CIP that is used on Ethernet-based networks.The CIP preprocessor detects CIP and ENIP traffic running on TCP or UDP and sends it to the intrusion rules engine.
You can use CIP and ENIP keywords in custom intrusion rules to detect attacks in CIP and ENIP traffic.
Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications.
Note:
Both DNP3 and CIP preprocessors can be used to detect traffic anomalies but we choose CIP as it is widely used in industrial applications.
Note:
+ An intrusion rule is a specified set of keywords and arguments that the system uses to detect attempts to exploit vulnerabilities in your network. As the system analyzes network traffic, it compares packets against the conditions specified in each rule, and triggers the rule if the data packet meets all the conditions specified in the rule. + Preprocessor rules, which are rules associated with preprocessors and packet decoder detection options in the network analysis policy. Most preprocessor rules are disabled by default.
NEW QUESTION # 258
Which statement about IOS zone-based firewalls is true?
- A. Only one interface can be assigned to a zone.
- B. An interface can be assigned to multiple zones.
- C. An unassigned interface can communicate with assigned interfaces
- D. An interface can be assigned only to one zone.
Answer: D
NEW QUESTION # 259
An engineer enabled SSL decryption for Cisco Umbrella intelligent proxy and needs to ensure that traffic is inspected without alerting end-users.
- A. Restrict access to only websites with trusted third-party signed certificates.
- B. Modify the user's browser settings to suppress errors from Umbrella.
- C. Upload the organization root CA to the Umbrella admin portal
- D. Import the Umbrella root CA into the trusted root store on the user's device.
Answer: C
NEW QUESTION # 260
Refer to the exhibit.
When configuring a remote access VPN solution terminating on the Cisco ASA, an administrator would like to utilize an external token authentication mechanism in conjunction with AAA authentication using machine certificates. Which configuration item must be modified to allow this?
- A. DHCP Servers
- B. SAML Server
- C. Method
- D. Group Policy
Answer: C
Explanation:
In order to use AAA along with an external token authentication mechanism, set the "Method" as "Both" in the Authentication.
NEW QUESTION # 261
Which Cisco DNA Center Intent API action is used to retrieve the number of devices known to a DNA Center?
- A. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/networkdevice?parameter1=value¶meter2=value&....
- B. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/network-device
- C. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/network-device/count
- D. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v 1/networkdevice/startIndex/recordsToReturn
Answer: C
NEW QUESTION # 262
What are two differences between a Cisco WSA that is running in transparent mode and one running in explicit mode? (Choose two.)
- A. When the Cisco WSA is running in transparent mode, it uses the WSA's own IP address as the HTTP request destination.
- B. The Cisco WSA responds with its own IP address only if it is running in explicit mode.
- C. The Cisco WSA is configured in a web browser only if it is running in transparent mode.
- D. The Cisco WSA responds with its own IP address only if it is running in transparent mode.
- E. The Cisco WSA uses a Layer 3 device to redirect traffic only if it is running in transparent mode.
Answer: A,B
NEW QUESTION # 263
A Cisco FTD engineer is creating a new IKEv2 policy called s2s00123456789 for their organization to allow for additional protocols to terminate network devices with They currently only have one policy established and need the new policy to be a backup in case some devices cannot support the stronger algorithms listed in the primary policy What should be done in order to support this?
- A. Change the encryption to AES* to support all AES algorithms in the primary policy
- B. Make the priority for the primary policy 10 and the new policy 1
- C. Change the integrity algorithms to SHA* to support all SHA algorithms in the primary policy
- D. Make the priority for the new policy 5 and the primary policy 1.
Answer: B
NEW QUESTION # 264
An engineer is configuring web filtering for a network using Cisco Umbrella Secure Internet Gateway.
The requirement is that all traffic needs to be filtered. Using the SSL decryption feature, which type of certificate should be presented to the end-user to accomplish this goal?
- A. organization owned root
- B. SubCA
- C. third-party
- D. self-signed
Answer: A
NEW QUESTION # 265
Which policy represents a shared set of features or parameters that define the aspects of a managed device that are likely to be similar to other managed devices in a deployment?
- A. Platform Service Policy
- B. Device Management Policy
- C. Access Control Policy
- D. Group Policy
Answer: A
Explanation:
Cisco Firepower deployments can take advantage of platform settings policies. A platform settings policy is a shared set of features or parameters that define the aspects of a managed device that are likely to be similar to other managed devices in your deployment, such as time settings and external authentication. Examples of these platform settings policies are time and date settings, external authentication, and other common administrative features.
A shared policy makes it possible to configure multiple managed devices at once, which provides consistency in your deployment and streamlines your management efforts. Any changes to a platform settings policy affects all the managed devices where you applied the policy. Even if you want different settings per device, you must create a shared policy and apply it to the desired device.
For example, your organization's security policies may require that your appliances have a "No Unauthorized Use" message when a user logs in. With platform settings, you can set the login banner once in a platform settings policy.
Reference:
Therefore the answer should be "Platform Settings Policy", not "Platform Service Policy" but it is the best answer here so we have to choose it.
NEW QUESTION # 266
What is the Cisco API-based broker that helps reduce compromises, application risks, and data breaches in an environment that is not on-premise?
- A. Cisco Cloudlock
- B. Cisco App Dynamics
- C. Cisco Umbrella
- D. Cisco AMP
Answer: A
Explanation:
Explanation
Explanation
Cisco Cloudlock is a cloud-native cloud access security broker (CASB) that helps you move to the cloud safely.
It protects your cloud users, data, and apps. Cisco Cloudlock provides visibility and compliance checks, protects data against misuse and exfiltration, and provides threat protections against malware like ransomware.
NEW QUESTION # 267
An engineer is trying to decide between using L2TP or GRE over IPsec for their site-to-site VPN implementation. What must be un solution?
- A. GRE over IPsec cannot be used as a standalone protocol, and L2TP can.
- B. L2TP uses TCP port 47 and GRE over IPsec uses UDP port 1701.
- C. L2TP is an IP packet encapsulation protocol, and GRE over IPsec is a tunneling protocol.
- D. GRE over IPsec adds its own header, and L2TP does not.
Answer: A
NEW QUESTION # 268
Which posture assessment requirement provides options to the client for remediation and requires the remediation within a certain timeframe?
- A. Audit
- B. Optional
- C. Visibility
- D. Mandatory
Answer: A
Explanation:
A posture requirement is a set of compound conditions with an associated remediation action that can be linked with a role and an operating system. All the clients connecting to your network must meet mandatory requirements during posture evaluation to become compliant on the network. Posture-policy requirements can be set to mandatory, optional, or audit types in posture policies. If requirements are optional and clients fail these requirements, then the clients have an option to continue during posture evaluation of endpoints. Mandatory Requirements During policy evaluation, the agent provides remediation options to clients who fail to meet the mandatory requirements defined in the posture policy. End users must remediate to meet the requirements within the time specified in the remediation timer settings. For example, you have specified a mandatory requirement with a user-defined condition to check the existence of C:\temp\text.file in the absolute path. If the file does not exist, the mandatory requirement fails and the user will be moved to Non-Compliant state. Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/ b_ise_admin_guide_14_chapter_010111.html Posture-policy requirements can be set to mandatory, optional, or audit types in posture policies. If requirements are optional and clients fail these requirements, then the clients have an option to continue during posture evaluation of endpoints.
Mandatory Requirements
During policy evaluation, the agent provides remediation options to clients who fail to meet the mandatory requirements defined in the posture policy. End users must remediate to meet the requirements within the time specified in the remediation timer settings.
For example, you have specified a mandatory requirement with a user-defined condition to check the existence of C:\temp\text.file in the absolute path. If the file does not exist, the mandatory requirement fails and the user will be moved to Non-Compliant state.
Reference:
A posture requirement is a set of compound conditions with an associated remediation action that can be linked with a role and an operating system. All the clients connecting to your network must meet mandatory requirements during posture evaluation to become compliant on the network. Posture-policy requirements can be set to mandatory, optional, or audit types in posture policies. If requirements are optional and clients fail these requirements, then the clients have an option to continue during posture evaluation of endpoints. Mandatory Requirements During policy evaluation, the agent provides remediation options to clients who fail to meet the mandatory requirements defined in the posture policy. End users must remediate to meet the requirements within the time specified in the remediation timer settings. For example, you have specified a mandatory requirement with a user-defined condition to check the existence of C:\temp\text.file in the absolute path. If the file does not exist, the mandatory requirement fails and the user will be moved to Non-Compliant state. Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/ b_ise_admin_guide_14_chapter_010111.html
NEW QUESTION # 269
Which API is used for Content Security?
- A. IOS XR API
- B. NX-OS API
- C. AsyncOS API
- D. OpenVuln API
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/security_management/sma/sma12-0/api/ b_SMA_API_12/test_chapter_01.html
NEW QUESTION # 270
A network administrator is using the Cisco ESA with AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?
- A. The file is queued for upload when connectivity is restored.
- B. The file upload is abandoned.
- C. AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.
- D. The ESA immediately makes another attempt to upload the file.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118796-technote-esa-00.html
NEW QUESTION # 271
How is Cisco Umbrella configured to log only security events?
- A. in the Reporting settings
- B. per network in the Deployments section
- C. in the Security Settings section
- D. per policy
Answer: D
Explanation:
The logging of your identities' activities is set per-policy when you first create a policy. By default, logging is on and set to log all requests an identity makes to reach destinations. At any time after you create a policy, you can change what level of identity activity Umbrella logs. From the Policy wizard, log settings are: Log All Requests-For full logging, whether for content, security or otherwise Log Only Security Events-For security logging only, which gives your users more privacy-a good setting for people with the roaming client installed on personal devices Don't Log Any Requests-Disables all logging. If you select this option, most reporting for identities with this policy will not be helpful as nothing is logged to report on. Reference: https://docs.umbrella.com/deployment-umbrella/docs/log-management From the Policy wizard, log settings are:
Log All Requests-For full logging, whether for content, security or otherwise Log Only Security Events-For security logging only, which gives your users more privacy-a good setting for people with the roaming client installed on personal devices Don't Log Any Requests-Disables all logging. If you select this option, most reporting for identities with this policy will not be helpful as nothing is logged to report on.
The logging of your identities' activities is set per-policy when you first create a policy. By default, logging is on and set to log all requests an identity makes to reach destinations. At any time after you create a policy, you can change what level of identity activity Umbrella logs. From the Policy wizard, log settings are: Log All Requests-For full logging, whether for content, security or otherwise Log Only Security Events-For security logging only, which gives your users more privacy-a good setting for people with the roaming client installed on personal devices Don't Log Any Requests-Disables all logging. If you select this option, most reporting for identities with this policy will not be helpful as nothing is logged to report on. Reference: https://docs.umbrella.com/deployment-umbrella/docs/log-management
NEW QUESTION # 272
What are two functionalities of northbound and southbound APIs within Cisco SDN architecture? (Choose two.)
- A. Northbound interfaces utilize OpenFlow and OpFlex to integrate with network devices.
- B. Southbound interfaces utilize device configurations such as VLANs and IP addresses.
- C. Southbound APIs utilize CLI, SNMP, and RESTCONF.
- D. Northbound APIs utilize RESTful API methods such as GET, POST, and DELETE.
- E. Southbound APIs are used to define how SDN controllers integrate with applications.
Answer: C,D
NEW QUESTION # 273
An engineer wants to automatically assign endpoints that have a specific OUI into a new endpoint group. Which probe must be enabled for this type of profiling to work?
- A. SNMP
- B. NetFlow
- C. DHCP
- D. NMAP
Answer: D
Explanation:
Cisco ISE can determine the type of device or endpoint connecting to the network by performing "profiling." Profiling is done by using DHCP, SNMP, Span, NetFlow, HTTP, RADIUS, DNS, or NMAP scans to collect as much metadata as possible to learn the device fingerprint. NMAP ("Network Mapper") is a popular network scanner which provides a lot of features. One of them is the OUI (Organizationally Unique Identifier) information. OUI is the first 24 bit or 6 hexadecimal value of the MAC address. Note: DHCP probe cannot collect OUIs of endpoints. NMAP scan probe can collect these endpoint attributes: + EndPointPolicy + LastNmapScanCount + NmapScanCount + OUI + Operating-system Reference: http://www.network-node.com/blog/2016/1/2/ise-20-profiling Profiling is done by using DHCP, SNMP, Span, NetFlow, HTTP, RADIUS, DNS, or NMAP scans to collect as much metadata as possible to learn the device fingerprint.
NMAP ("Network Mapper") is a popular network scanner which provides a lot of features. One of them is the OUI (Organizationally Unique Identifier) information. OUI is the first 24 bit or 6 hexadecimal value of the MAC address.
Note: DHCP probe cannot collect OUIs of endpoints. NMAP scan probe can collect these endpoint attributes:
+ EndPointPolicy
+ LastNmapScanCount
+ NmapScanCount
+ OUI
+ Operating-system
Cisco ISE can determine the type of device or endpoint connecting to the network by performing "profiling." Profiling is done by using DHCP, SNMP, Span, NetFlow, HTTP, RADIUS, DNS, or NMAP scans to collect as much metadata as possible to learn the device fingerprint. NMAP ("Network Mapper") is a popular network scanner which provides a lot of features. One of them is the OUI (Organizationally Unique Identifier) information. OUI is the first 24 bit or 6 hexadecimal value of the MAC address. Note: DHCP probe cannot collect OUIs of endpoints. NMAP scan probe can collect these endpoint attributes: + EndPointPolicy + LastNmapScanCount + NmapScanCount + OUI + Operating-system Reference: http://www.network-node.com/blog/2016/1/2/ise-20-profiling
NEW QUESTION # 274
An administrator wants to ensure that all endpoints are compliant before users are allowed access on the corporate network. The endpoints must have the corporate antivirus application installed and be running the latest build of Windows 10.
What must the administrator implement to ensure that all devices are compliant before they are allowed on the network?
- A. Cisco Identity Services Engine with PxGrid services enabled
- B. Cisco ASA firewall with Dynamic Access Policies configured
- C. Cisco Identity Services Engine and AnyConnect Posture module
- D. Cisco Stealthwatch and Cisco Identity Services Engine integration
Answer: C
NEW QUESTION # 275
Which algorithm provides encryption and authentication for data plane communication?
- A. SHA-96
- B. SHA-384
- C. AES-256
- D. AES-GCM
Answer: D
Explanation:
The data plane of any network is responsible for handling data packets that are transported across the network.
(The data plane is also sometimes called the forwarding plane.)
Maybe this Qwants to ask about the encryption and authentication in the data plane of a SD-WAN network (but SD-WAN is not a topic of the SCOR 350-701 exam?).
In the Cisco SD-WAN network for unicast traffic, data plane encryption is done by AES-256-GCM, a symmetrickey algorithm that uses the same key to encrypt outgoing packets and to decrypt incoming packets. Each router periodically generates an AES key for its data path (specifically, one key per TLOC) and transmits this key to the vSmart controller in OMP route packets, which are similar to IP route updates.
The data plane of any network is responsible for handling data packets that are transported across the network.
(The data plane is also sometimes called the forwarding plane.)
Maybe this Qwants to ask about the encryption and authentication in the data plane of a SD-WAN network (but SD-WAN is not a topic of the SCOR 350-701 exam?).
In the Cisco SD-WAN network for unicast traffic, data plane encryption is done by AES-256-GCM, a symmetrickey algorithm that uses the same key to encrypt outgoing packets and to decrypt incoming packets. Each router periodically generates an AES key for its data path (specifically, one key per TLOC) and transmits this key to the vSmart controller in OMP route packets, which are similar to IP route updates.
Reference:
The data plane of any network is responsible for handling data packets that are transported across the network.
(The data plane is also sometimes called the forwarding plane.)
Maybe this Qwants to ask about the encryption and authentication in the data plane of a SD-WAN network (but SD-WAN is not a topic of the SCOR 350-701 exam?).
In the Cisco SD-WAN network for unicast traffic, data plane encryption is done by AES-256-GCM, a symmetrickey algorithm that uses the same key to encrypt outgoing packets and to decrypt incoming packets. Each router periodically generates an AES key for its data path (specifically, one key per TLOC) and transmits this key to the vSmart controller in OMP route packets, which are similar to IP route updates.
NEW QUESTION # 276
What is the concept of Cl/CD pipelining?
- A. The project is split into time-limited cycles and focuses on pair programming for continuous code review
- B. The project code is centrally maintained and each code change should trigger an automated build and test sequence
- C. Each project phase is independent from other phases to maintain adaptiveness and continual improvement
- D. The project is split into several phases where one phase cannot start before the previous phase finishes successfully.
Answer: D
NEW QUESTION # 277
Drag and drop the posture assessment flow actions from the left into a sequence on the right.
Answer:
Explanation:
NEW QUESTION # 278
Drag and drop the Firepower Next Generation Intrusion Prevention System detectors from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 279
Which API method and required attribute are used to add a device into DNAC with the native API?
- A. POST and name
- B. lastSyncTime and pid
- C. GET and serialNumber
- D. userSudiSerialNos and devicelnfo
Answer: A
NEW QUESTION # 280
......
Exam Questions for 350-701 Updated Versions With Test Engine: https://guidetorrent.dumpstorrent.com/350-701-exam-prep.html