Obtain the IN101_V7 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass
IN101_V7 Exam Dumps Contains FREE Real Quesions from the Actual Exam
NEW QUESTION # 19
You are pre-terminating cable. Where should the labels be placed?
- A. Both ends
- B. Near end
- C. Far end
Answer: A
NEW QUESTION # 20
Fall protection is required whenever a person is exposed to a fall hazard more than ____?
- A. 1.2 m (4')
- B. 2.4 m (8')
- C. 1.83 m (6')
- D. 3 m (10')
Answer: C
NEW QUESTION # 21
Which of the following tools is a low-cost cable verifier that can be used to test for opens, shorts, crossed pairs, and miswires in 4- pair cables?
- A. TDR
- B. Telephone test set
- C. Wire map tester
- D. Qualification tester
Answer: C
NEW QUESTION # 22
What is the maximum pull force for four-strand optical fiber?
- A. 880 N (200 lbf)
- B. 222N (50 lbf)
- C. 330 N (75lbf)
Answer: B
NEW QUESTION # 23
How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?
- A. 6.3mm (0.25")
- B. 25mm (1")
- C. 12.7mm (0.5")
- D. 38 mm (1.5")
Answer: C
NEW QUESTION # 24
Which type of cabling is installed between a main cross-connect (campus distributor) and an intermediate cross-connect (building distributor)?
- A. Second-level backbone
- B. First-level backbone
- C. Horizontal
Answer: B
NEW QUESTION # 25
What is the maximum allowable horizontal cable length?
- A. 10 m (33 ')
- B. 90 m (295')
- C. 30 m (100')
- D. 50 m (164')
Answer: B
NEW QUESTION # 26
Which of the following is a floor serving space that serves as a point of termination for horizontal and backbone cables?
- A. Work area
- B. ER
- C. TR
- D. EF
Answer: C
NEW QUESTION # 27
Which of the following is used to establish a 0 volt (V) reference for ac electrical power systems?
- A. Alternating current (AC) grounding electrode system
- B. Equipment grounding system
- C. Telecommunication bonding infrastructure
Answer: A
NEW QUESTION # 28
Which of the following markings is used for non-conductive optical fiber general-purpose cables?
- A. OFCP
- B. OFNP
- C. OFNG
- D. OFCR
Answer: C
NEW QUESTION # 29
How long does it take someone to form a first impression?
- A. 1 to 2 minutes
- B. 5 to 10 minutes
- C. 30 minutes to 1 hour
- D. 10 to 15 seconds
Answer: D
NEW QUESTION # 30
Which of the following topologies is the recommended topology for distribution systems in campus environments?
- A. Star
- B. Hierarchical Star
- C. Ring
- D. Tree
Answer: B
NEW QUESTION # 31
What is the maximum number of work areas that a CP should serve?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 32
During the troubleshooting phase, what is the first step?
- A. Isolate
- B. Verify
- C. Test
- D. Repair
Answer: B
NEW QUESTION # 33
Which type of optical fiber cable should be color coded with a RED outer cable sheath?
- A. MM optical fiber with 50 um core diameter
- B. MM optical fiber with 50 um core diameter (laser-optimized)
- C. Dispersion-shifted SM optical fiber
- D. Polarization maintain SM optical fiber
Answer: C
NEW QUESTION # 34
A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?
- A. Full-duplex
- B. Simplex
- C. Half-duplex
Answer: B
NEW QUESTION # 35
If you are working on a catwalk, you are required to wear _____?
- A. Nothing, your fine on the catwalk
- B. Safety belt
- C. Full body harness and two lanyards
Answer: C
NEW QUESTION # 36
......
The BICSI IN101_V7 exam is based on the BICSI Installer 1 course material, which is intended to deliver a fundamental understanding of the installation and maintenance of optical fiber, copper, and wireless cabling systems. IN101_V7 course offers practical guidance on how to install and test different types of cabling systems, including horizontal and backbone cabling, grounding and bonding, and cabling support.
Use Real BICSI Achieve the IN101_V7 Dumps - 100% Exam Passing Guarantee: https://guidetorrent.dumpstorrent.com/IN101_V7-exam-prep.html