HP New 2023 HPE0-S59 Test Tutorial (Updated 60 Questions) [Q24-Q43]

HP New 2023 HPE0-S59 Test Tutorial (Updated 60 Questions)

HPE0-S59 Exam Questions Dumps, Selling HP Products

NEW QUESTION # 24
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?

A. The customer has to create a new logical enclosure for the additional frame
B. The additional frame must have HPE Virtual Connect FC modules installed
C. The customer can grow the existing logical enclosure up to 5 frames
D. The additional frame cannot have 12Gb SAS connection modules installed

Answer: A

NEW QUESTION # 25
Which statement about a new HPE SimpliVity deployment is true?

A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
B. All new HPE SimpliVity models support deduplication and compression
C. New HPE SimpliVity deployments are licensed per node not per physical socket
D. All new HPE SimpliVity models are based on AMD CPUs

Answer: B

NEW QUESTION # 26
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

Answer: B

NEW QUESTION # 27
What is a restriction of using a RoCE network?

A. It does not support smart link and private network features.
B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
C. It is by default configured as an untagged network and cannot be a part of a network set.
D. It does not support Private VLAN and Multicast VLAN.

Answer: C

NEW QUESTION # 28
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Answer:

Explanation:

NEW QUESTION # 29
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A. If the D3940 module is imported in managed state that allows volume provisioning.
B. If there Is a logical interconnect created based on the 12Gb SAS switches.
C. If there is at least one ISCSI network configured that will provide access to the module.
D. If the D3940 storage module is property licensed through HPE OneView interface.

Answer: A

NEW QUESTION # 30
What is one of me benefits of using HPE Composer 2?

A. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
B. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
C. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
D. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup

Answer: A

NEW QUESTION # 31
Which compute node parameters are captured within server hardware type?

A. installed operating system
B. Number of the CPUs
C. Size of the memory Installed
D. Mezzanine card configuration

Answer: A

NEW QUESTION # 32
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

A. Storm control
B. sFlow
C. Port flap protection
D. Pause flood protection

Answer: B

NEW QUESTION # 33
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?

A. Only HPE Superdome Flex supports HPE Persistent Memory
B. Only HPE Superdome Flex 280 can support multiple nPars
C. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
D. Only HPE Superdome Rex 280 can be managed using HPE OneView

Answer: D

NEW QUESTION # 34
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Answer:

Explanation:

NEW QUESTION # 35
Which statement about manual orchestration during the firmware update is true?

A. It provides the ability to install an older firmware version than currently Installed In the interconnect
B. It is supported only for logical enclosures with at least three frames
C. It provides an ability to select and update one side of the Interconnect topology at a time
D. It allows all the interconnect modules to be activated manually at the same time.

Answer: C

NEW QUESTION # 36
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?

A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

Answer: C

NEW QUESTION # 37
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Answer: A

NEW QUESTION # 38
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

Answer:

Explanation:

NEW QUESTION # 39
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

A. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
B. It can support a single processor only and up to 4 per chassis
C. It is equipped with HPE Persistent memory by default
D. It is fully managed using HPE OneView including all connections

Answer: B

NEW QUESTION # 40
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?