2023 Valid NSE7_SDW-7.0 Real Exam Questions, practice NSE 7 Network Security Architect
Latest Success Metrics For Actual NSE7_SDW-7.0 Exam (Updated 70 Questions)
Fortinet NSE7_SDW-7.0 exam covers a wide range of topics related to SD-WAN technologies, including network design, security, deployment, and management. NSE7_SDW-7.0 exam is designed to test the candidate's proficiency in configuring and managing SD-WAN components, such as edge devices, controllers, and gateways. It also evaluates the candidate's knowledge of SD-WAN security features, such as encryption, firewalling, and access control.
NEW QUESTION # 31
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Disable tcp-session-without-syn under config system settings.
- B. Enable auxiliary-session under config system settings.
- C. Enable snat-route-change under config system global.
- D. Disable allow-subnet-overlap under config system settings.
Answer: B
Explanation:
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session
NEW QUESTION # 32
Refer to the exhibit.
The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?
- A. When T_INET_0_0 has 12% packet loss.
- B. When T_INET_0_0 has 4% packet loss.
- C. When T_INET_1_0 has 4% packet loss.
- D. When all three members have the same packet loss.
Answer: D
NEW QUESTION # 33
Which two statements about SD-WAN central management are true? (Choose two.)
- A. The objects are saved in the ADOM common object database.
- B. It does not support meta fields.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It uses templates to configure SD-WAN on managed devices.
Answer: A,D
Explanation:
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg
NEW QUESTION # 34
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferredmember in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Disable tp-session-without-syn under config system settings.
- B. Enable auxiliary-session under config system settings.
- C. Enable snat-route-change under config system global.
- D. Disable allow-subnet-overlap under config system settings.
Answer: B
Explanation:
Explanation
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-
NEW QUESTION # 35 
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 is assigned a manual IP address.
- B. port2 is referenced in a static route.
- C. port1 is referenced in a firewall policy.
- D. port1 and port2 are not administratively down.
Answer: C
NEW QUESTION # 36
What are two benefits of using the Internet service database (ISDB) in an SD-WAN rule? (Choose two.)
- A. The ISDB requires application control to maintain signatures and perform load balancing.
- B. The ISDB is dynamically updated and reduces administrative overhead.
- C. The ISDB applies rules to traffic from specific sources, based on application type.
- D. The ISDB contains the IP addresses and port ranges of well-known internet services.
Answer: B,D
NEW QUESTION # 37
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. Firewall policy ID 1 has source NAT disabled.
- B. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- C. Changes have been made on firewall policy ID 1 on FortiGate.
- D. FortiGate has terminated the session after a change on policy ID 1.
Answer: C
NEW QUESTION # 38 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- B. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
- C. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
- D. The measured bandwidth is less than 100 KBps.
Answer: B,D
NEW QUESTION # 39
Refer to the exhibits.
Exhibit A
Exhibit B -
Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
- A. The traffic will be load balanced across all three overlays.
- B. The traffic will be routed over T_INET_1_0.
- C. The traffic will be routed over T_INET_0_0.
- D. The traffic will be routed over T_MPLS_0.
Answer: D
NEW QUESTION # 40
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process?
(Choose two.)
- A. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. A factory reset performed on FortiGate.
- D. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- E. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
Answer: A,B
NEW QUESTION # 41
What does enabling the exchange-interface-ip setting enable FortiGate devices to exchange?
- A. The gateway address of their IPsec interfaces
- B. The IP address of their IPsec interfaces
- C. The tunnel ID of their IPsec interfaces
- D. The name of their IPsec interfaces
Answer: B
NEW QUESTION # 42
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?
- A. Destination internet service must be enabled on the traffic shaping policy.
- B. Web filtering must be enabled on the firewall policy.
- C. Application control must be enabled on the firewall policy.
- D. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
Answer: C
NEW QUESTION # 43
Which three matching traffic criteria are available in SD-WAN rules? (Choose three.)
- A. URL categories
- B. Application signatures
- C. Source and destination IP address
- D. Type of physical link connection
- E. Internet service database (ISDB) address object
Answer: B,C,E
NEW QUESTION # 44
Refer to the exhibit.
Which statement explains the output shown in the exhibit?
- A. FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.
- B. FortiGate will not re-evaluate the session following a firewall policy change.
- C. FortiGate performed standard FIB routing on the session.
- D. FortiGate must re-evaluate the session due to routing change.
Answer: D
NEW QUESTION # 45
Exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- B. The packet size exceeded the outgoing interface MTU.
- C. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
- D. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
Answer: A
NEW QUESTION # 46
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?
- A. Port2 becomes alive after three successful probes are detected.
- B. Host 8.8.8.8 is reachable through port1 and port2.
- C. The administrator manually restores the static routes for port2, if port2 becomes alive.
- D. FortiGate removes all static routes for port2.
Answer: D
Explanation:
Explanation
This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead
NEW QUESTION # 47
Refer to the exhibit.
An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)
- A. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
- B. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.
- C. T_INET_1_0 has a higher member configuration priority than T_INET_0_0.
- D. T_INET_0_0 does not have a valid route to the destination.
Answer: B,D
NEW QUESTION # 48
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. A factory reset performed on FortiGate.
- D. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- E. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
Answer: A,B
NEW QUESTION # 49
Which two interfaces are considered overlay links? (Choose two.)
- A. IPsec
- B. LAG
- C. GRE
- D. Physical
Answer: A,C
NEW QUESTION # 50
Refer to the exhibits.
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 is assigned a manual IP address.
- B. port2 is referenced in a static route.
- C. port1 is referenced in a firewall policy.
- D. port1 and port2 are not administratively down.
Answer: C
NEW QUESTION # 51
Which two settings can you configure to speed up routing convergence in BGP? (Choose two.)
- A. link-down-failover
- B. update-source
- C. holdtime-timer
- D. set-route-tag
Answer: A,C
NEW QUESTION # 52
Refer to the exhibit.
The device exchanges routes using IBGP.
Which two statements are correct about the IBGP configuration and routing information on the device?
(Choose two.)
- A. ibgp-multipath is disabled.
- B. additional-path is enabled.
- C. You can run the get router info routing-table database command to display the additional paths.
- D. Each BGP route is three hops away from the destination.
Answer: B,C
NEW QUESTION # 53
......
Fortinet NSE7_SDW-7.0 (Fortinet NSE 7 - SD-WAN 7.0) Certification Exam is a comprehensive certification exam that tests the knowledge and expertise of network professionals in Fortinet's SD-WAN solution. Fortinet NSE 7 - SD-WAN 7.0 certification exam is designed to validate the skills and knowledge required to manage, configure, and troubleshoot Fortinet's SD-WAN solution, and is an essential certification for professionals looking to advance their careers in network security.
Fortinet NSE7_SDW-7.0 certification exam is designed to validate the knowledge and skills of IT professionals on software-defined wide area network (SD-WAN) solutions. Fortinet NSE 7 - SD-WAN 7.0 certification is intended for network engineers, security administrators, and other professionals who are responsible for implementing and managing SD-WAN solutions in their organizations. NSE7_SDW-7.0 exam covers a wide range of topics related to SD-WAN, including architecture, deployment, security, and troubleshooting.
Genuine NSE7_SDW-7.0 Exam Dumps Free Demo Valid QA's: https://guidetorrent.dumpstorrent.com/NSE7_SDW-7.0-exam-prep.html