[Feb-2026] Pass Cisco 300-445 Tests Engine pdf - All Free Dumps
Designing and Implementing Enterprise Network Assurance Practice Tests 2026 | Pass 300-445 with confidence!
NEW QUESTION # 84
What is the first step in establishing a metric baseline for network performance analysis?
- A. Establish alert thresholds
- B. Analyze network traffic patterns
- C. Collect historical data
- D. Define key performance indicators (KPIs)
Answer: D
Explanation:
Defining key performance indicators (KPIs) is the initial step in setting a metric baseline for network performance analysis.
NEW QUESTION # 85
What type of alert rule configuration is used to monitor SNMP traps from network devices?
- A. Historical data analysis
- B. Threshold-based alerts
- C. Anomaly detection
- D. Protocol-based alerts
Answer: D
Explanation:
Protocol-based alerts are used to monitor SNMP traps from network devices by triggering alert notifications when specific SNMP traps are received, indicating potential network issues or device failures.
NEW QUESTION # 86
What role does a scripting agent play in network assurance?
- A. Analyzing WAN performance
- B. Managing network devices
- C. Collecting local data
- D. Automating tasks
Answer: D
Explanation:
A scripting agent automates tasks such as configuration changes and data collection in network assurance, enhancing operational efficiency and reducing manual effort.
NEW QUESTION # 87
Which Thousand Eyes test is specifically designed to assess the performance of voice communication?
- A. Voice test
- B. DNS test
- C. Web test
- D. Network test
Answer: A
Explanation:
The Voice test in Thousand Eyes is specifically designed to assess the performance of voice communication, identifying issues such as latency and jitter in network assurance.
NEW QUESTION # 88
What is the first step in diagnosing network issues using collected data?
- A. Identifying network anomalies
- B. Identifying affected devices
- C. Analyzing packet traces
- D. Analyzing performance metrics
Answer: D
Explanation:
The first step in diagnosing network issues using collected data is analyzing performance metrics to identify deviations from normal network behavior.
NEW QUESTION # 89
What is the first step in setting a metric baseline for network performance analysis?
- A. Establish alert thresholds
- B. Analyze network traffic patterns
- C. Collect historical data
- D. Define key performance indicators (KPIs)
Answer: D
Explanation:
Defining key performance indicators (KPIs) is the initial step in setting a metric baseline for network performance analysis.
NEW QUESTION # 90
What is the purpose of setting a metric baseline in network assurance?
- A. Monitor application usage
- B. Benchmark performance
- C. Identify security threats
- D. Measure user experience
Answer: B
Explanation:
The purpose of setting a metric baseline in network assurance is to benchmark performance by establishing normal operating ranges for key performance indicators (KPIs) and network metrics, enabling comparison against current performance to detect deviations and anomalies that may indicate potential issues or security threats.
NEW QUESTION # 91
Which integration type enables seamless data exchange between Cisco technologies and external systems using standardized protocols?
- A. Open telemetry
- B. SNMP integration
- C. Alerting thresholds
- D. API integration
Answer: D
Explanation:
API integration facilitates seamless data exchange between Cisco technologies and external systems using standardized protocols.
NEW QUESTION # 92
What type of alert rule is configured based on the state of BGP routing table in network assurance?
- A. Security alert
- B. Threshold alert
- C. Performance alert
- D. Protocol alert
Answer: D
Explanation:
A protocol alert rule is configured based on the state of BGP routing table in network assurance to detect and mitigate potential routing issues.
NEW QUESTION # 93
Which agent type specializes in collecting data from remote network devices for analysis in network assurance?
- A. Synthetic user agent
- B. Remote management agent
- C. Local collection agent
- D. Scripting agent
Answer: B
Explanation:
A remote management agent specializes in collecting data from remote network devices for analysis in network assurance, facilitating centralized monitoring and management.
NEW QUESTION # 94
What is the purpose of a local collection agent in network assurance?
- A. Monitoring physical hardware
- B. Optimizing server configurations
- C. Managing user authentication
- D. Capturing network traffic data
Answer: D
Explanation:
Local collection agents capture network traffic data for analysis and troubleshooting purposes.
NEW QUESTION # 95
When determining agent location, what factor should be prioritized to ensure effective data collection?
- A. Geographic distribution
- B. Security requirements
- C. Network throughput
- D. Latency considerations
Answer: D
Explanation:
Latency considerations should be prioritized when determining agent location to ensure timely data collection and analysis in network assurance.
NEW QUESTION # 96
How does Cisco Catalyst Manager contribute to endpoint agent deployment in network assurance?
- A. Centralizing device management
- B. Facilitating server authentication
- C. Monitoring application performance
- D. Optimizing WAN performance
Answer: A
Explanation:
Cisco Catalyst Manager contributes to endpoint agent deployment by centralizing device management, ensuring efficient deployment and configuration across the network.
NEW QUESTION # 97
What type of alert rule configuration is used to monitor VPN connectivity issues affecting the end-user experience?
- A. Connectivity-based rules
- B. State-based rules
- C. Throughput-based rules
- D. Performance-based rules
Answer: A
Explanation:
Connectivity-based rules are used to monitor VPN connectivity issues affecting the end-user experience by setting thresholds for VPN connection establishment times, packet loss rates, and latency to detect connectivity failures, disruptions, or degradation and trigger alerts for immediate investigation and resolution.
NEW QUESTION # 98
What distinguishes active monitoring from passive monitoring in network assurance?
- A. Continuous monitoring of server logs
- B. Collection of historical data
- C. Real-time analysis of network traffic
- D. Active probing of network devices
Answer: D
Explanation:
Active monitoring involves actively probing network devices to collect real-time data, while passive monitoring observes network traffic passively without interacting with devices.
NEW QUESTION # 99
When diagnosing network issues such as packet loss, which collected data is typically analyzed?
- A. Network traffic logs
- B. Performance metrics
- C. User authentication logs
- D. Server configurations
Answer: B
Explanation:
When diagnosing network issues such as packet loss, performance metrics collected from network devices, such as routers, switches, and firewalls, are typically analyzed. These metrics include round-trip time (RTT), jitter, and packet loss rates to identify abnormalities and troubleshoot network performance issues.
NEW QUESTION # 100
......
Online Exam Practice Tests with detailed explanations!: https://guidetorrent.dumpstorrent.com/300-445-exam-prep.html